I love your cat!

He says thanks.

How did a spotted slug get into the mix?

"Slug" = slang for "bullet." Come on, Helice, everybody knows that. Nothing could be more appropriate in this gallery.

I had to defend myself against that thing! Haven't you ever seen Night of the Creeps? Thing was like 3 ft long and trying to attack me. They go in through the ears or mouth and make their way into the brain, which then they take control of your motor functions, lay eggs in the brain, and grow more zombie slugs.

It's a very ugly way to die.

Dang! I'd pay to see that!

Same spike bayonet I have. With the short barrel and a 30+ round mag that bayonet will no longer fold down all the way as long as the mag is in place.

Using a grinder to solve the problem is probably illegal.

It works though.

Those are two totally unrelated statements.

Using a grinder to solve what problem? And what law would be broken? The only laws I've read that you need to be concerned about are the 922 compliant laws which state that you can only replace so many parts with imported parts for the weapon.

That's the first I've read about the bayonet causing problems with the mag though.

You have a Chinese paratrooper?

I read tons of bad things about most of the 30 round magazines. Feed problems and what not. I think I'm going to pick up some 20 round Tapco magazines as they get amazing reviews. Plus, they're only $17 a pop.
Magazine

I'd also like to go with this mod for it, also from Tapco...
Furniture...

It only cost $90 and has the picatinny rails so I can accessorize.

I also want to stick a recoil buffer behind the bolt to reduce the metal on metal contact. Thats a hefty spring in there.

Also, I figured out how to pull the internals out of the stock... Easy.

I cannot for the life of me figure out how to get the receiver cover off. Theres a little release switch on the back right of the cover and I assume thats supposed to release it... just can't get it off.

Suggestions?

Also, what year is your SKS?